Electro Harmonix Nano clone

Condizioni: Usato €35.00
Loading Aggiorno il carrello...

The Nano Clone presents a lush, true analog chorus at a very affordable price

The heritage of classic Electro-Harmonix Small Clone chorus comes full circle in an economy version. Chorusing is an effect that bends the frequency of the input signal and blends it with the original sound, creating a shimmering doubling effect.

True bypass
Rate knob
Tough and compact die-cast chassis
9-volt battery included
Optional 96DC-200BI power supply available

The heritage of classic Electro-Harmonix Small Clone chorus comes full circle in an economy version. Chorusing is an effect that bends the frequency of the input signal and blends it with the original sound, creating a shimmering doubling effect.

True bypass
Rate knob
Tough and compact die-cast chassis
9-volt battery included
Optional 96DC-200BI power supply available

The Nano Clone is a compact battery operated Chorus device that features a RATE control allowing you to change the speed of the Chorus.

To produce the Chorus effect, the Nano Clone bends the frequency slightly from the input source and mixes this altered signal with some direct unaffected signal. The combination produces a doubling effect.

- OPERATING INSTRUCTIONS -

Connect your instrument to the INPUT jack. Connect your amplifier to the AMP jack. Please note that whenever a plug is inserted into the INPUT jack, the Nano Clone is ON and it is draining current from the battery.

The RATE knob controls the speed of the chorus effect. Turning the RATE knob clockwise increases the rate of the chorus.

The red LED will light up when the Nano Clone is in effect mode. When in True Bypass mode, the LED will be off. Use the FOOTSWITCH to toggle between effect and True Bypass mode.

- POWER -

Power from the internal 9-volt battery is activated by plugging into the INPUT jack. The input cable should be removed when the unit is not in use to avoid running down the battery. If a battery eliminator is used, the Nano Clone will be powered up as long as a wall-wart is plugged into the wall.
The optional 9V power supply from Electro-Harmonix is US96DC-200BI (same as used by Boss ™ & Ibanez(tm)) 9.6 volts/DC 200ma. The barrel connector on the front of the Nano Clone is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use.

I prezzi esposti sono validi esclusivamente per acquisti dal sito.

  • Registrati ora!

    Riceverai la newsletter periodica di IDRA MUSIC per essere sempre aggiornato sulle nostre offerte e gli eventi interessanti. Registrati»